I know these are currently out of fashion but I’m still thankful they exist.

Let’s remind ourselves of devices that use(d) these standardized batteries:

  • Toys
  • Digital cameras
  • Torches
  • Gadgets like fans
  • Wireless keyboards
  • TV remotes

Thanks to having a standardized system of batteries,

  • You can use the same battery across several devices. This is a no brainer but it’s very practical.
  • Batteries can charge quicker thanks to being put in a dedicated charger and not being limited by USB cables. (But yes I concede that USB has been updated for faster charging over the years)
  • Devices don’t have down time when their battery is charging. To charge, the battery is removed from the device and can immediately be replaced with a fresh one.
  • You’ll never have to trash a device due to an expired battery. Just buy a replacement. And building on this…
  • Any improvements in future battery technology can be retro-fitted into your existing devices. And there is a high incentive for future improvement, because…
  • An accessible (due to easy replacement) and large (due to many devices) battery market is very attractive to competition.

If you look at the pros I listed, they all happen to be things that would be very useful for electric cars. So I think it would aid the adoption of electric cars if their batteries were standardized too.

  • Nawor3565@lemmy.blahaj.zone
    link
    fedilink
    arrow-up
    24
    ·
    1 year ago

    While all this is true, unfortunately not many devices support swappable 18650s, either they have swappable AA/AAA or have built-in 18650s that would require disassembly to replace. However, if you CAN find a device with swappable 18650s (the only ones I’ve found so far are flashlights) they’re absolutely great!

    • Bobbinapples@kbin.social
      link
      fedilink
      arrow-up
      13
      ·
      1 year ago

      I am not aware of many devices that use swappable 18650’s either. Off the top of my head the only ones i’m aware of are vape devices.

      • B0rax@feddit.de
        link
        fedilink
        arrow-up
        11
        ·
        1 year ago

        There are also flashlights with 18650s. There are some powerbanks with exchangeable 18650s as well.

        But that’s all I know of.

        • sparkl_motion@beehaw.org
          link
          fedilink
          English
          arrow-up
          2
          ·
          1 year ago

          I have a set of lasers powered by them as well. Love that it makes the whole thing a bit larger and durable.

        • ChaoticNeutralCzech@lemmy.ml
          link
          fedilink
          arrow-up
          1
          ·
          1 year ago

          These powerbanks can set your house on fire if the chip shorts out: the wire gets very hot and melts through the plastic like this: Odysee/YT/Piped. I recommend installing a 2A (for 1A powerbanks) or 5A (for 2.1A powerbanks) automobile fuse in series with the cells or each cell individually.

      • anlumo@feddit.de
        link
        fedilink
        arrow-up
        17
        ·
        1 year ago

        Besides being the wrong size by definition, AA batteries are expected to have 0.8V to 1.5V, while Lithium Ion cells (such as 18650) have a voltage range of 2V to 4.2V. That’s completely incompatible, you couldn’t even replace two AA batteries with a single Li-Ion cell.

        • abhibeckert@beehaw.org
          link
          fedilink
          arrow-up
          1
          ·
          1 year ago

          Most 18650’s don’t go down to 2 volts. They should be considered “flat” at 3.4 volts - going any lower risks damaging the battery (unless you know what chemistry it uses, some can go lower safely).

          Allowing a rechargeable AA to get down to 0.8V is also risky, if you go much lower than that you will damage the battery.

          An 18650 is essentially the same voltage as three AA’s. And the amount of charge level they store is closer to five or six. The size and weight, on the other hand, is a bit more than one AA.

          But the biggest advantage, by far, is a lot of devices can be powered by a single 18650 but would require multiple AA’s to have acceptable battery life (or a high enough voltage). As soon as you have multiple batteries thing start to get really complex. Your batteries will never be at exactly the same charge state and that can potentially damage the battery and the device.

          • Vex_Detrause@lemmy.ca
            link
            fedilink
            arrow-up
            7
            ·
            1 year ago

            Don’t they need a circuit protection to not over-discharge lithium batteries? Most AA devices would suck all the juice from the battery until it stops working.

          • CmdrShepard@lemmy.one
            link
            fedilink
            English
            arrow-up
            3
            ·
            1 year ago

            Yes.

            The other problem with lithium batteries like 18650s is that they need to be handled with care so manufacturers don’t want users swapping them in and out like AA/AAA. This is why they build them into devices and have you charge them through a regulated port.

          • anlumo@feddit.de
            link
            fedilink
            arrow-up
            3
            ·
            1 year ago

            The problem with those is that the device loses the ability to sense the charge status of the battery, since the voltage remains the same until it’s empty.

      • abhibeckert@beehaw.org
        link
        fedilink
        arrow-up
        3
        ·
        edit-2
        1 year ago

        But 18650 size is manufactured at much higher scales than other sizes, and therefore it’s the cheapest, and therefore it continues to dominate.

    • abhibeckert@beehaw.org
      link
      fedilink
      arrow-up
      2
      ·
      edit-2
      1 year ago

      The main barrier is when you need multiple batteries.

      If you install a dozen 18650’s in a device (or thousands in a car), they will work great as long as they’re all at the same charge level and can maintain the same voltage throughout the discharge cycle. If they can’t do that, then the battery could catch fire. Yikes. So any device with multiple 18650 cells will hard wire them together so the user is forced to use and charge and discard the entire set of cells as a single battery.

      AA/AAA NiMH batteries won’t catch fire if they’re uneven, but being uneven will damage the batteries. You don’t need to keep them together to be safe, but you do need to keep them together if you want the batteries to last longer than six months. Keeping them together can be a logistical nightmare and it’s the main reason I’ve stopped using them… it’s just too much work to keep all the batteries together (especially if the device is shared in a household or workplace). If you get it wrong, then they don’t last much longer than disposables.

      Disposable batteries have the same issue - but since they’re disposable you’re probably pulling four brand new batteries from a packet.

      An 19650 cell holds about the same amount of energy as five AA batteries. So there are a lot of devices that can run well off a single battery, and those tend to be the ones that are user replaceable.