I made this from a long piece cherry offcut that I’ve had sitting around for ages. Here’s a better picture of the interesting bit:
https://i.imgur.com/LV0ep0a.jpeg
I’m honestly not thrilled with the finish. I thought I’d sanded out all the little ‘scales’ the planer leaves, but many came back when I put the oil on.

  • moncharleskey@lemmy.zip
    link
    fedilink
    arrow-up
    3
    ·
    6 months ago

    Not bad, but it’s going to put some pressure on the back of the guitar, particularly a hollow or semi-hollow body. If the top part to support the neck was brought forward so that it could make full contact with the neck and keep the back of the guitar from making contact, I think that would be a better setup. You could maybe put a leather strap or something similar between those two pegs to cradle the neck and bring the body forward. On the whole though, I like it, nice job!

    • AMillionMonkeys@lemmy.worldOP
      link
      fedilink
      arrow-up
      2
      ·
      6 months ago

      Thank you! It was made specifically for a Fender P bass, which is not particularly delicate. I have another one with a different design that I made for my acoustic, but that stand is more of a prototype made out of pine and not as impressive.
      I do like the idea of moving the ‘head’ forward so it cradles the neck. I only just had enough stock to make this (well, without cutting into some bigger, nicer boards) so I didn’t have a lot of room for features or experimentation.

      • moncharleskey@lemmy.zip
        link
        fedilink
        arrow-up
        2
        ·
        edit-2
        6 months ago

        Ahhh, nice. Nothing quite matches woodworking for trial and error! I’ve built a couple myself and each one gets closer to perfect, but not there yet!

        Here’s what I’ve got. Nothing too special but I love my Sheraton. My guitars.