• toynbee@lemmy.world
    link
    fedilink
    arrow-up
    50
    ·
    23 days ago

    I used to almost exclusively listen to any kind of audio through headphones. I had a microphone near my desk configured so that it would pass through the vibration of footsteps directly to my headphones. I was rarely startled, no matter what sordid activity I was undertaking.

    • SubArcticTundra@lemmy.ml
      link
      fedilink
      arrow-up
      32
      ·
      edit-2
      23 days ago

      I swear the footsteps trigger a Pavlov response in me at this point. I can even tell who it is by the footsteps

      • Track_Shovel@slrpnk.net
        link
        fedilink
        English
        arrow-up
        21
        ·
        23 days ago

        Pavlov

        As in you instantly lose an erection, because you’ve been conditioned to associate footfalls with a ruined orgasm?

      • toynbee@lemmy.world
        link
        fedilink
        arrow-up
        10
        ·
        23 days ago

        I used to be able to do that, too! These days, I live with two people: an adult wife and a toddler. Their gaits are pretty easily distinguishable.

          • monsterpiece42@reddthat.com
            link
            fedilink
            arrow-up
            2
            ·
            23 days ago

            By nature noticing these things repeatedly either comes from hypervigilance or having sensory differences that make you hear footsteps when others would not.

            Obviously there are exceptions like if you live on a floor lower than someone or something.

      • toynbee@lemmy.world
        link
        fedilink
        arrow-up
        5
        ·
        23 days ago

        Honestly, that was some 25-30 years ago. It was pretty simple to setup back then, but it might not be the same now, especially in Windows.

      • gamermanh@lemmy.dbzer0.com
        link
        fedilink
        English
        arrow-up
        5
        ·
        edit-2
        23 days ago

        I forget the type of mic but there are mics specifically designed for picking up vibrations from surfaces (I googled it, they’re called surface mics ffs, could probably use a cheap normal mic without a pop filter tho)

        If those use USB or 3.5mm, or can be made to, then plug them in and on windows check the “listen to this device” checkbox and boom, you’ll hear what’s coming through that mic. Adjust the sensitivity to your needs, done

        On other OSs you can do it too just as easily but I don’t remember what my Linux distro calls it and if you’ve installed Linux you have enough info from my comment to figure it out methinks