Was planning to list it for sale somewhere, but no idea what to price it at. Any idea? Is it even worth someone’s time fixing it up?
Was planning to list it for sale somewhere, but no idea what to price it at. Any idea? Is it even worth someone’s time fixing it up?
I’d be much more worried about the potentiometers having internal corrosion and possibly sending a strong crackle into the amplifier, which it isn’t particularly designed for. If the amplifier happens to be turned up extra high, a random crackle like that would be way louder than even plucking the strings, which would put undue stress on the amplifier transistors/tubes.
Not saying this is very likely to happen, but it is possible for such a scenario to cause a shorted amp or a blown speaker.
Aside from that rare possibility, you said the guitar is from the early 2000s. Well it’s 2023, that makes it around 20 years old, so it does have some years on it.
I’m glad you admitted to being wrong about the guitar shocking someone or shorting out an amp.
A crackle isn’t going to short out an amplifier or blow a speaker either. This again speaks to your fundamental lack of understanding around guitar electronics or amplifiers.
The guitar itself can’t be from older than 2006. The sticks on the guitar are both from bands who started around 06/07. This production for this model stopped in 2012. If you think things that are 12-17 years old have “some years on them” maybe avoid school zones.
I have personally blew out 3 speakers with a crackle from a messed up volume pot. Had my bass plugged into a cab that was already turned way up and a band mate decided he was gunnu play with knobs on my bass while playing and the crackle of the volume knob going up and down blew out 3 speakers in an 8x10 cab.
It was his own hardware not mine tho lol.
Also you can be shocked through a guitar or through an amp. Heres a copy/paste from something else I posted here:
So a guitar (or mic) isn’t going to shock you, but the equipment a guitar is connected to could provide enough current to noticably shock you. If that amp or whatever has a ground fault or had its ground lifted, it could be a shock hazard as bigger amps can hold a lot of voltage in their chassis.
Some in this thread have said that you straight up can’t be shocked by a guitar and that is blatant misinformation.
An example of how to get shocked is in live sound, you’ll likely have all your amps and stuff plugged into some kind of power supply or generator. That power supply is providing current to your amp. Let’s say that power supply has a ground fault, If your amps ground is good, it’s probably fine. The current in your amp that should be flowing to ground, is doing so. If you lifted your amps ground cause it was buzzing or something, that current from the power supply is now running wild in your amp. That current can and will travel up the 1/4in jack into your guitar and into the pickups. Making a circuit that electrifies everything as there are no grounds for that current to disapiate into. Now, when you pick up your guitar and press down on a string, that string potentially makes contact with the pickups sending current through the metal strings into your body and potentially through your body into the ground as you are now the only ground in the circuit. This shocks the shit out of you. And considering that a power supply can be very high voltage this could easily be fatal.
So the story is nice but you are talking about speakers and this has been about how @Over_clox wrongly stated that plugging that guitar into an amp would blow the amp or shock the player. The guitar itself can’t shock anyone or destroy any equipment it is plugged into.
If a faulty amp with a bad ground causes a shock through the guitar, it is from the amp and passed through the guitar. So the cause of the problem and the shock is the amp. Not the guitar.
If an amp is dialed to 10 and you plug in a guitar and play a chord and blow the speakers, did the chord you play come through so loud that it blew the speakers? Nope! The amp is driving the speakers past what they can handle. Again not the guitars fault. Same could be said about scratchy pots, switches, etc.
But let’s bring this back to the thread, OP was given an Epiphone Les Paul Pro. Someone assumed it was wet and had corrosion. The oxidation on the pickups and parts are normal for gold hardware from Epiphone. Having a 5w practice amp to test would be more than enough. Cause again, the guitar isn’t shocking anyone or destroying any amps!
Can amps shock you or break speakers? Yes. But in in your speaker example you didn’t get shocked. The amp didn’t even break. The speakers did and it was due to human error. Those crackles didn’t damage anything until it was at full volume.
I didn’t assume it was wet and had corrosion, I know it was. Or a long time in a humid basement. It’s called years of humidity, and even possibly long term exposure near salt water and/or a swimming pool with chlorine.
Some of us know what TF we’re talking about, others don’t…
The person you just responded to knows even more than me, and confirms the potential risks.
I don’t believe Over_clox said anything about the guitar blowing out an amp or being wet, just that it was corroded and would electrocute someone.
If an amp is dialed to 10 and you plug in a guitar and play a chord and blow the speakers, did the chord you play come through so loud that it blew the speakers? Nope! The amp is driving the speakers past what they can handle. Again not the guitars fault. Same could be said about scratchy pots, switches, etc.
Can amps shock you or break speakers? Yes. But in in your speaker example you didn’t get shocked. The amp didn’t even break. The speakers did and it was due to human error. Those crackles didn’t damage anything until it was at full volume.
I never mentioned the speakers getting shocked or that, that is what I thought the issue was.
In my nice story I mentioned that my bass was already plugged into a cab, the cab was cranked up and my bass was at its max volume. My idiot band mate started playing with knobs, to listen to my basses active EQ, while the whole band was playing together. They fucked with my bad volume pots knob, cause they were confused on what that knob did. My basses volume being lowered with that bad pot caused it to crackle very fucking loudly. Blowing 3 speakers in an 8x10 cab. It was very dumb lol.
I mentioned that story again because you claimed before that crackle can’t kill a speaker and I wanted to clarify that yes the crackle broke the speakers. This had nothing to deal with electric shock, that’s why I didn’t mention it. The amp wasn’t driving the speakers too hard, it was faulty electronics in the bass that caused the excessive load on the speakers. So yes, it was the guitar and bad pots fault. And yes, also a healthy amount of human error; moving pots while plugged into an already very loud cab.
Hopefully that puts us on the same page.
Just to finish it out. We fixed that cab, it was like $120 per each speaker that needed to be replaced and I took my bass into a shop and got a new pot. No more dumb issues now. We all know better lol. This was awhile ago, I haven’t played with that group in about 4 years.
But let’s bring this back to the thread, OP was given an Epiphone Les Paul Pro. Someone assumed it was wet and had corrosion. The oxidation on the pickups and parts are normal for gold hardware from Epiphone. Having a 5w practice amp to test would be more than enough. Cause again, the guitar isn’t shocking anyone or destroying any amps!
I think you’re just repeating information that has already been established and understood.
I’m not taking Over_clox’s side in making assumptions about the guitar itself. They made an assumption that the guitar was a shock risk and y’all dragged them hard, through the mud for a pretty reasonable assumption. Reading through the chain, to a degree, the way they reacted might’ve warranted it. But checking to ensure electronics are in order is best practice.
I think all of us have agreed that the guitar isn’t really a shock risk, but I went out of my way earlier to explain how it could be tho. I did that especially cause a couple mentioned that there was no way you could get shocked through (or by) a guitar, that’s demonstrably false. I don’t want someone to think that they are perfectly immune to electricity when messing with electric guitars and their potentially high voltage equipment.
Not like I’m helping to make this civil at this point but, I mostly made comments here because there is hostilely and hastily made misinformation, half thoughts, and insults being put out into this chain.
I’m so glad most of you folks throw safety to the wind, when I also have over 18 years of experience repairing wet/corroded electronics. I don’t fuck around, I don’t take chances plugging up rusted electronics. I dunno, maybe I value my life more than the rest of you folks.
I’ll stand by my words to the day I die, better safe than sorry
But since I can’t express the potential risks well enough for others to comprehend, this other fella expressed his comment in this thread quite eloquently…
https://lemmy.world/comment/4368756
TL;DR - Clean and maintain your junk. Would you plug in a rusty toaster?
“I don’t fuck around!” hahahahahaha I know you don’t. I love that you keep dropping your credentials to “backup” your wrong claims. How many years have you been doing guitar center repairs?
I dunno, how long have you been passively testing rusty guitars rather than actually at least inspect, clean, and tune them?
You’re acting as if I’m wrong for doing things with a professional priority of order of operations.
Honestly I’m done with this conversation now. Please don’t bother me anymore. You can do things half-ass if you want, but I don’t take liability for half-ass work.
You said a guitar could electrocute someone or blow an amp. I corrected you. The whole thread I have said a guitar cannot shock you or destroy an amp.
So far I’ve only been proven right. A guitar cannot shock you without an outside source that is already faulty and or not grounded correctly. No outside source, no shocking no damage.
No examples of amps being blown have been brought up from scratchy pots or switches. Speakers were mentioned but it also required amp volume at 100% for the speaker to break. Which any manufacturer will tell you is within normal operation.
If you are feeling bothered, you can choose to not reply to me. That is an option! From this exchange I did learn one thing. You probably have bad toan.
Sorry, this actually was brought up earlier…
https://youtube.com/watch?v=xS_5K5YEYv8
StOp BoThErInG mE!!!
Don’t bother me anymore then.
https://lemmy.world/comment/4381969
Here is an alternative Piped link(s):
https://piped.video/watch?v=xS_5K5YEYv8
Piped is a privacy-respecting open-source alternative frontend to YouTube.
I’m open-source; check me out at GitHub.