• fraksken@infosec.pub
    link
    fedilink
    arrow-up
    3
    ·
    9 months ago

    That sounds like a work hazard. Shouldn’t there be a brake on the blade if the safety is broken?

    • ouRKaoS@lemmy.today
      link
      fedilink
      arrow-up
      2
      ·
      9 months ago

      Of course there should be, but my guess is things would get stuck there & jam the machine several times a day causing you to have to take the whole thing apart during the middle of the rush.

      If you just take it off, you don’t have to worry about that and no one is going to be dumb enough to not wait for it to stop…

      • PoppyJalopy@lemmy.world
        link
        fedilink
        arrow-up
        2
        ·
        9 months ago

        Yeah every now and then a bagel would get stuck. We had this like plastic rod with a massive end so you could jam it down the shoot without ever hitting the blade.

        It was really just me forgetting to be patient and wait. It takes like a good minute for the blade to come to a complete stop. Usually you can hear it whirring and know it’s still spinning, but after working in there all day you kind of get used to the sound.

        • ouRKaoS@lemmy.today
          link
          fedilink
          arrow-up
          3
          ·
          9 months ago

          That forgetfulness is why OSHA rules exist. Probably should have had Lockout/Tag out on that machine

        • fraksken@infosec.pub
          link
          fedilink
          arrow-up
          2
          ·
          9 months ago

          That’s how experienced people get into accidents. Work fast and forget to think. It happens so often.

          glad you got to keep your fingers 😊

    • Buddahriffic@lemmy.world
      link
      fedilink
      arrow-up
      1
      ·
      9 months ago

      I’m not sure if that works while the blade is spinning down after being shut off. As I understand it, the tech uses electrical resistance to detect contact with flesh, so if the on/off switch cuts power entirely, it wouldn’t be able to detect that. But I have no idea how those are generally wired.

      • fraksken@infosec.pub
        link
        fedilink
        arrow-up
        2
        ·
        9 months ago

        From my time in the factory, if a safety seal was broken (e.g. open a hatch giving access to rotating parts),the whole machine halts.

        you are correct though that such safety would require electricity to function.

        I did not meant a brake like you have on the table saws that pull away the saw upon skin contact. That shit is expensive

        • Buddahriffic@lemmy.world
          link
          fedilink
          arrow-up
          2
          ·
          9 months ago

          One way to implement something like that would be to have a fail safe break that uses electricity to pull a friction pad away from the blade when the machine turns on. Then when you shut it off, the brake gets applied, slowing the blade quicker than the friction of the bearings would alone. It would probably be safer to do that than to use energy to apply a brake because someone might be used to the blade stopping and get hurt if the power goes out.

          So yeah, I agree that there should be something like that, now that I understand what you were referring to.