Last year I built an AM5 PC with x670e board and installed 2x gen4 ssds and 1 gen3 from different OEMs.

Today I installed another gen4 and ran benchmark on all drives. To my surprise all the old ssds read speed is down by 30-60% from last result, write speed is similar to specs. I am unable to figure out what is wrong with them all drives are showing 98-99% of spare.

  • fuckwit_mcbumcrumble@lemmy.dbzer0.com
    link
    fedilink
    English
    arrow-up
    13
    ·
    3 months ago

    Look up your owners manual and go to the section on the pcie/m.2 configuration. See what slots run at what speeds, and use what pcie lanes.

    Your CPU has X pcie lanes and you’re able to use all of them. Your chipset also has X pcie lanes, but some are used for the USB ports, some for sata ports, etc. If you put the SSD into a slot that’s already maxed out on pcie lanes then it’s probably going to drop the lane count of multiple things down (the process isn’t super smart).

    My desktop has the two x16 slots connected directly to the CPU, and 2 of the M.2 slots are connected to the CPU. If I install just my GPU and just my main SSD I run at full speed, but if I add a second M.2 SSD my GPU drops to x8 speeds. I think there’s a 3rd slot hidden away that’s on the chipset.

    • catculation@lemmy.zipOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      3 months ago

      So there are 28x PCIe Gen 5 (24 usable) 16 lanes for GPU, 4 for m.2 and 4 shared with chipset

      Additionally 12x PCIe gen4 and 4 Gen3 lanes.

      All ssds are running in x4 mode

  • MentalEdge@sopuli.xyz
    link
    fedilink
    English
    arrow-up
    3
    ·
    edit-2
    3 months ago

    My motherboard has two M.2 slots, but they share a PCIE gen3 lane.

    If I put SSDs in both, and they are both NVME, (I could put a sata SSD in one of them) they both drop down to gen2 speeds as the lane gets bifurcated in order for both slots to work at the same time.

    In my case, my mother board manual actually DOESN’T mention this, so I had to find out the hard way when I plonked in a second drive. I did check when I bought the mobo because I knew this is common, but oh well.

    • catculation@lemmy.zipOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      3 months ago

      WD Black SN770 (down to ~3300 mb/s) Crucial P3 (most affected) Sabrent R4 (least affected)

      • Blaster M@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        3 months ago

        None of these drives are problem drives iirc… if anything, how full are the drives percentagewise?

        • catculation@lemmy.zipOP
          link
          fedilink
          English
          arrow-up
          1
          ·
          3 months ago

          WD is boot drive and remaining are for storing AAA titles. They gets full but I uninstall games after completing it but most of the time they are filled to 70-80%.

          • Blaster M@lemmy.world
            link
            fedilink
            English
            arrow-up
            4
            ·
            3 months ago

            I’ve noticed that performance starts slowing down when you get near full on these drives sometimes.

  • raldone01@lemmy.world
    link
    fedilink
    English
    arrow-up
    1
    ·
    edit-2
    3 months ago

    Which os are you running?

    Try to partition it with free space at the end and see if it makes a difference.

    Try to trim the drive and see if it speeds up again.

    Do you use any disk encryption?